The washing machine has, in addition to washing, layout and intermediate spin modes Nominal loading weight, kg, not more than 60 kg The machine has, in addition to washing, layout and intermediate spin modes Nominal loading weight, kg, not more than 60 kg The discharge of the waste liquid and the removal of steam and foam are carried out outside the machine, directly into the sewer and exhaust system, respectively They are recommended for use in laundries of enterprises, hotels, dormitories, medical institutions, etc., as well as in communal laundries and self-service laundries They are also used for washing dirt-resistant mats Nominal loading weight, kg, max volumetric module 10 dm3/kg 60 volumetric module 12 dm3/kg 50 volumetric module 14 dm3/kg 42 . The geometric volume of the inner drum, dm3 600 Inner drum: diameter x depth, mm 1000x735 Loading height, mm 780 The inner and outer drum are stainless steel The cladding is painted steel The type of process control is manual The separation factor (G-factor) during washing is 0.7-0.85 during spin 10 The rotation speed of the drum, rpm, not less than 50-55 when washing and 189 when pressing Residual humidity, %, not more than 110 Type of heating Electric Rated power, kW of the electric motor of the drive 2,8/4,0/4,5 heating elements 30 Overall dimensions, mm, no more: length (depth) 1640 width 1230 height 1650 Weight, kg, no more than 780 Specific power consumption, kWh / kg, not more than 0.5 Specific water consumption, dm3 / kg, not more than 30 Requirements for supply lines Conditional passage of cold and hot water valves, mm 50 The outlet diameter of the drain pipe, mm 65 Cold and hot water pressure, 0.2-0.4 MPa Mains voltage, 380V