Excellent resistance to ultraviolet radiation Polyurethane Outdoor Floor Paint for public areas
Product Description
Excellent resistance to ultraviolet radiation Polyurethane Outdoor Floor Paint for public areas is a multi-functional coating system aiming at public areas like outdoor area, parking lot, factory workshop and so on. This system uses epoxy mortar mid-coat and Polyurethane top coat. With good abrasion resistance, high strength, strong compression resistance and strong resistance to ultraviolet radiation, it is applied to various indoor and outdoor floors.
Product formation
Two component paint of epoxy resin, pigments, fillers, additives and active diluent.
Product features
. High adhesion strength with the primary
. Seamless, Low hardening shrinkage, no easy to crack
. Easy to clean, do not gather dust and bacteria
. Environmental protection non-toxic
. Wear resistance, can withstand the forklift, carts and other tools’ long time rolling
. Anti permeability, corrosion resistance, Oil resistance and water resistance
. Easy to construction and good decoration, the surface is smooth and color bright
. Also can be made for static conductive epoxy floor paint
Using
Mainly used in electronics, electrical appliances, hardware, machinery factory, school, hospital, chemical, pharmaceutical, laboratory, food factory, textile factory, printing factory, chemical plant, computer room, supermarket, parking lot, all kinds of electrical control room, command center And so on the ground has a very high demand for the industry.
Packing
Paint: 20 kg/bucket Curing agent: 4 kg/bucket
Technical Data:
Color and appearance of paint film | Colors and smooth film |
Dry film thickness, um | 100-120 |
Drying time (25 ℃), H | surface dry≤6h, hard dry≤24h, Fully cured 7d |
Adhesion (zoned method), class | ≤1 |
Impact strength, kg, CM | ≥70 |
Compressive strength, M Pa | ≥85 |
Tensile strength, MPa | ≥9 |
Bending hardness, MPa | ≥7 |
Wear resistance (Mg, 750g/500r)
| ≤20 |
Water resistance | 48 hrs, no blister, no fall off, no change color |
Alkali resistance | 48hrs, no blister, no fall off, no change color |
Acid resistance | 48hrs, no blister, no fall off, no change color |
Leveling property, min | ≥5 |
Hardness (swing rod method)
| ≥0.6 |
Double coating interval time:
Temperature | 5℃ | 25℃ | 40℃ |
Shortest time | 32h | 18h | 6h |
Longest time | 14d | 7d | 5d |
Verification Failed:
Verification Failed:
Comments
Feedback from Buyer