white quartzite ledge stone

white quartzite ledge stone

Size: Abonomity
Color:White
Used: Exterior and Interior Wall
Brand:Lvjia

artificial Cultural Stone for exterior wall construction  

Man-made art stones, also known as man-made cultural stones, are made of clay, cement, and imported fastness pigments by hands. They are high intensity, low specific gravity, light weight, easy installation, waterproof, colorful, UV resistant, non-radioactive compared with the natural stones. The above characteristics make them widely used for internal and external wall decoration in gardens, villas, clubs, theme parks, residential homes, golf course and other buildings. The man-made cultural stones can show the variety of cultural connotations and natural styles, so that they enable people to have a relaxed mood of returning and tasting the nature while enjoying the aesthetic pleasure, to achieve the attractive and practical situation. They are the best materials to replace the natural stones and slates

The man-made art stones (man-made cultural stones) can band together with the circumjacent surrounding, enable each stone to reflect the effect of nature, to meet peoples living concept of advocating nature and returning to nature. Their clear vein, delicate dense texture, and elegant tone make formal, elegant, harmony in whole and changes in details combined perfectly.  The rich original flavor, fresh and simple, gives the unique personality for the buildings; the rough and riot can integrate into the idea and concept of the designers; the multi-level combination and changes also make the surfaces more colorful visual sense and enable the buildings to be much more poetic.

Installation Guide:

Preparation for the Wall

First to confirm the strength of the wall to meet the construction requirements, for the low water absorption rate walls  such as wood, plastic, you can use barbed wire reinforcement. Cleared before the construction of the wall surface, floating dust, debris, smooth wall should be firstly processed into a rough surface. Water the wall one day before the construction and wet the wall again pre-construction. 

Preparation of the eco-art stone

Pre-place the products on the floor before paving to confirm the effect. Adjust the overall balance and aesthetics in advance. Such as: small pieces of stone should be placed next to the large stone; convex surface next to the flat surface stone; thick stone next to the thin stone

Blending the bonding material
Using more than 425 white cement, ordinary Portland cement (cement: sand: 801 glue = 1:2:0.03 or      cement: sand: water = 1:1:0.4) . 

Regarding cement, please use Portland cement or ordinary Portland cement. Sand should be clean meeting national standard 2mm or below. 

Water, use clean tap water. Mortar evenly and put it on the wall. 

In order to prevent the bonding material solidified before installing the art stones, the area of the bonding materials in the stone must not exceed 0.5m2-1m2, and the thickness control in about 2mm-3mm. Full wet the art stone, and then place the bonding materials in the back of the art stone, wiping more in the middle and less in the corners.(the average thickness of the bond materialpaste is about 4mm-6mm). 

Installation

The corner stone should be installed first. And the long stone should be installed next to the short stone. After installing the corners, install the other tiles from the edge to the center. When install the same size of tiles, please choose the tiles from 2 or 3 different cartons, in order to make the colors fit perfectly. Please full paste the stones to the wall, and make sure the bonding materials overflow from the back of the stone. 

Adjust the Dimension

The size of the stone can be cut into smaller ones,in order to make a good effect. When cutting the stones, cut from the place where is weaker. The debris can be installed between the big stones.

Mortar Joint 

The bricks should be installed by the shape of "T". The width of the mortar joint is about 8mm~10mm. When installing the uneven shapes of stones, the width of the mortar joint should be less than 20mm.

The mortar joint materials should be used in time before it being too dry. (If too dry, it is hard to install and easy to craze. If too wet, it is hard to cover the overflowed bonding material)

The time for the mortar joint materials become dry is different from different wall and climate. Use the sticks to scrape off the redundant part and press tight. Then use the brush to make the surface plain. If the art stones stained with the mortar joint materials, they should be cleaned in time.

 Notice

Don't install in the extremely cold temperature.

Don't install in the sun.( A awning is recommended)

Do confirm the water percentage of the wall before installation.(If the wall is too dry, it will absorb water from the bonding materials and mortar joint.) Or the bonding material and the mortar joint will break off.

More Products:

Company Information

  About us 

LOPO mainly engages in manufacturing, marketing and service of exterior wall facade systems. Established in 2002, LOPO also has two branch factories for producing Artificial Cultural Stone and Terracotta bricks.  Leiyuan Industrial Co., Ltd is a joint venture enterprise which is invested by Fujian LOPO Coporation. We advocate to return to nature, integrate nature into life to create a different architectural style with the perceptions of modesty, nature, green, environmental protection and energy-saving. Designers draw inspiration from nature, selecting natural stone as a parent, and using high quality natural materials to develop styles of green eco-art Culture Stone in light weight. 

 Our main markets are Asia, North America, Middle East and Africa with products favored by customers from more than 60 countries. One of Leiyuan Industrial Co., Ltd.'s value and success foundation is customer service. Based on the concept of "Pursuing the utmost of quality and service", Leiyuan is committed to providing the vast customer service with sincere cooperation and win-win business relationship.

Packaging & Shipping

FAQ

 Frequently Asked Question of Lightweight Synthetic Exterior Decorative Wall Stone 

Q. What are Cultured Stone products ?
A. Cultured Stone is the registered brand name for our extensive line of manufactured stone veneer products. It is also the company name for the world's leading producer of manufactured stone.
Q. Is this real stone?
A. Cultured Stone products are manufactured stones with the additional advantages of lightweight and ease of installation plus al avaglobilability.

Q.What are Cultured Stone products made of?
A. Cultured Stone products are cast in molds taken from carefully-selected natural stone, using a process that faithfully captures even the faintest detail. Each color and texture uses its own blend of Portland cement, lightweight natural aggregates and iron oxide pigments. Even on close examination,these manufactured stones look and feel just like the originals.

Our Services

Customer Service System

♦Business managers responsible for building customer profiles, one to one customer service, streamline communication processes, maintain efficient operation;

♦Arrange specialist in each factory who in charge of communication with the factory production sector;

♦Factory specialist responsible for managing samples, follow up production process, inventory feedback, quality monitoring, recept visiting customers;

♦Foreign Trade General Manager responsible for supervising the entire workflow, coordinate and handle emergency services, understand real-time dynamic, handling customer complaints and visit potential customers.