5000000 Piece/Pieces per Year
Packaging & Delivery
Inner packing box
Outer exporting carton
Lead Time :
|Quantity(Pieces)||1 - 500||>500|
|Est. Time(days)||15||To be negotiated|
Brass alloy/Stainless steel
Wire drawing/Polishing/Spray painting
Capacity of modules
3 ways modules
Sink box Material
Base box dimension(mm)
Office and education
Industry and Engineering
Presentation and retail;
Orientation and safety;
Transit areas and parking;
Hotels, hospitality and wellness;
Health, sport and leisure;
Art and culture;
Underfloor duct can be ordered in combinations of duct sizes and runs of up to four ducts and in size combinations to provide for adequate capacity in a wide varity of installations.
Safewire underfloor duct is manufactured from brass alloy & stainless-steel and code gauge galvanized steel to provide maximum corrosion protection.
1.Access to the underfloor duct system in order to pull wires or make splices.
2.A method to separate duct runs as they cross each other at the intersection.
3.Junction boxes are avaiable configured with up to four openings on all four sides in combinations to provide for a wide varity of duct applications.
4.Heavy duty junction boxes are available for applications when heavy loads will be placed or rolled over the duct systems. These boxes are constructed with thick coverplates and the boxes are provided with adjustable support studs are required for application.
5. Multiple compartment junction boxes have interior partitions which separate the duct runs in the box and provide a continuous path through the box to the exiting duct runs.Corner conduit feeds are also avaiable upon request.
6.Standard boxes are fabricated from galvanized steel with with thickness mild steel plate.
7.Junction boxes have adjustable cover plate assembies which allow for adjustment upwards permitting accurate leveling to the finished floor.
8.Standard boxes are supplied with adjusting ring to match high preset. Box for use with higher presets require a junction box with a higher adjusting ring to suit the preset height.
9.Junction boxes are available for quarry tile applications.These boxes are supplied with an aluminum ring and pan deep to accept the tile.A series of stainless steel pans and rings are available to accept a wide range of floor finishes.
Available for F type 45*45mm type or D type23*26mm international sockets or modules types:
1.Dispose of trash in bottom box and prevent dirt and debris from entering inside.
2.The sealing ring is closely attached to the smooth surface to prevent water leakage.
3.When installing, pay attention to the opening direction,the length of the conductor to the bottom box shall not exceed 10cm,Set aside at least 200mm of cable.
4.When installing and wiring,Product should avoid direct contact with corrosive liquid, gas (strong acid, strong alkali, paint).
5.This product is suitable for dry surface treatment, avoid water flush and immersion, and ensure its insulation.
6.The flooring surface shall be at least level with the ground or 20mm below the ground.
1)This is a class I product and must be earthed.
2)This product must be installed/wired by a qualified electrician.
3)before installation/maintnance ,ensure the mains supply is switched off and the circuit fuses are removed or circuit breakers switch off.
4)Avoid acid alkaline solution flushing,avoid scratch of transparent protective paint,ensure corrosion resistance.
5)Only for concrete floor.
Safewire Electrical by Feilifu which is professional OEM manufactory of floor boxes ,desktop socket and electrical accessories for most global brand since 1998 in China . Our Factory by Feilifu is the only one produce full range of floor socket, desktop socket , switch socket and electrical accessories. Factory is granted by ISO9001, ISO14001 and OSHAS18001 system and product is certified by TUV , Germany.
The product line
CQC Test Center
Q:Do you have literature we can have?
A:Of course, we can post out a brochure or you can download it along with data sheets direct from here
Q:Do you manufacture all products yourself?
A:We manufacture all of our core product ranges ourselves as a proud best China manufacturer. A small number of our ancillary products are brought in from trusted partners also mainly China based.!
Q:Do all of your products comply to National standards?
A:Our products meet China National standard ,IEC standard and the relevant national standards such as SASO
Q:How long is the warranty on your products?
A:There is a 12 month warranty from date of delivery. In the event of any failure, items must be returned to Safewire for full investigation.
Q:How long make a sample?
A: Within 7 working days upon receipt of confirmed order and payment for standard product. Customization product order should be confirmed between us.