5000000 Piece/Pieces per Year
Packaging & Delivery
Inner packing box
Outer exporting carton
Lead Time :
|Quantity(Pieces)||1 - 500||>500|
|Est. Time(days)||15||To be negotiated|
Brass alloy/Stainless steel
Wire drawing/Polishing/Spray painting
Capacity of modules
12 ways modules
Sink box Material
Base box dimension(mm)
Office and education
Industry and Engineering
Presentation and retail;
Orientation and safety;
Transit areas and parking;
Hotels, hospitality and wellness;
Health, sport and leisure;
Art and culture;
1,The lid was opened at 90 degrees : Open the cover with the ground 90 degrees, furthermore , open and ground into a 180 degree flat is also available.When using, open the cover horizontally to the floor to avoid accident potential and product damage caused by cover erection.
2,Simple installation : Hinged cover with screw fix to steel box body.
3,The outlet way of the line can be chosen,DK type cable exit or HK type cable exit: The outlet port(reverse) can lead multi-strand wire cable out of the floor socket and effectively protect the wire cable skin against damaging. This cord outlet flaps fold down when in use to all cords out with main cover closed.
4,More Strong Scratch Resistance : Surface finish made from stainless steel or Brass by combination of tough material, Aluminum (ADC12) and shot blast finish on the surface achieves high scratch resistance.
5,durable socket receptacle:Using elastic phosphor copper avoids playing spark plug and plug set to bit dead ,ensure high conductivity and more life of pulling and plugging over 15000 times.PC+ABS(1.Modules fireproof : 850 degree C temp.; 2.Modules don't distortion under 102 degree C temp.; 3.Stand under 15 degree C temp) ;Oxygen Insulation & Fire resistance in accordance with UL94 international standard.
6,Good sealing:With temporary lid-secure to body during pour to prevent ingress of slurry.
7,Power-coated steel box has 10*25mm conduit and diameter of 27mm diameter knock-outs available to accommodate CAT 6A cabling available on request.
1.Dispose of trash in bottom box and prevent dirt and debris from entering inside.
2.The sealing ring is closely attached to the smooth surface to prevent water leakage.
3.When installing, pay attention to the opening direction,the length of the conductor to the bottom box shall not exceed 10cm,Set aside at least 200mm of cable.
4.When installing and wiring,Product should avoid direct contact with corrosive liquid, gas (strong acid, strong alkali, paint).
5.This product is suitable for dry surface treatment, avoid water flush and immersion, and ensure its insulation.
6.The flooring surface shall be at least level with the ground or 20mm below the ground.
1)This is a class I product and must be earthed.
2)This product must be installed/wired by a qualified electrician.
3)before installation/maintnance ,ensure the mains supply is switched off and the circuit fuses are removed or circuit breakers switch off.
4)Avoid acid alkaline solution flushing,avoid scratch of transparent protective paint,ensure corrosion resistance.
5)Only for concrete floor.
Safewire Electrical by Feilifu which is professional OEM manufactory of floor boxes ,desktop socket and electrical accessories for most global brand since 1998 in China . Our Factory by Feilifu is the only one produce full range of floor socket, desktop socket , switch socket and electrical accessories. Factory is granted by ISO9001, ISO14001 and OSHAS18001 system and product is certified by TUV , Germany.
The product line
CQC Test Center
Q:Do you have literature we can have?
A:Of course, we can post out a brochure or you can download it along with data sheets direct from here
Q:Do you manufacture all products yourself?
A:We manufacture all of our core product ranges ourselves as a proud best China manufacturer. A small number of our ancillary products are brought in from trusted partners also mainly China based.!
Q:Do all of your products comply to National standards?
A:Our products meet China National standard ,IEC standard and the relevant national standards such as SASO
Q:How long is the warranty on your products?
A:There is a 12 month warranty from date of delivery. In the event of any failure, items must be returned to Safewire for full investigation.
Q:How long make a sample?
A: Within 7 working days upon receipt of confirmed order and payment for standard product. Customization product order should be confirmed between us.