6mm 8mm 10mm Dark/light grey reflective insulated glass

6mm 8mm 10mm Dark/light grey reflective insulated glass

4+6A/9A/12A+4mm clear/tinted/reflective float non tempered

4+6A/9A/12A+4mm clear/tinted/reflective float both tempered

6+6A/9A/12A+6mm clear/tinted/reflective float non tempered

6+6A/9A/12A+6mm clear/tinted/reflective float both tempered

8+9A/12A+8mm        clear/tinted/reflective float non tempered

8+9A/12A+8mm        clear/tinted/reflective float both tempered

Maximum size: 2,400 x 4,500mm

Minimum size: 200 x 300mm

Maximum thickness: 60mm

Insulated glass is also called Insulated Glazing (IG), more commonly known as double glazing (or double-pane, and increasingly triple glazing/pane) are double or triple glass window panes separated by an air or other gas filled space to reduce heat transfer across a part of the building envelope.

Insulated Glass Units(IGU) are manufactured with glass in range of thickness from 3 mm to 10 mm or more in special applications. Laminated or tempered glass may also be used as part of the construction. Most units are manufactured with the same thickness of glass used on both panes,but special applications such as acoustic attenuation or security may require wide ranges of thicknesses to be incorporated in the same unit.

To reduce shear effects on the sealed unit (a major cause of premature failure), manufacturers use a rule of thumb that permits a difference of 1 mm between the thickness of the panes of glass used in the unit and still maintain the warranty for the unit.For example, a unit may be ordered with a 4 mm pane on the exterior and a 3 mm pane on the interior. These variations are allowed for architectural and cost reasons. Other combinations can be specified and produced but the manufacturer may reserve the right to limit the term of the warranty or refuse to warranty the unit altogether.

 IGU is a refabricated unit made of two or more glass panes with aluminum or stainless steel spacers filled with desiccant, which are edge-sealed with compound sealant (butyl, polysulfide or structural sealant)

The variety of IGU can be achieved by applying spacers of black, white, gray and more,

sealant of same color